|
|
 |
Sports/Safety Silver Trim High Visibility Edging Sew On Reflective Piping 1cm Wide/Sold By 20 Yards
|
 |
|
MSRP: $36.00
Price: $16.19
Item Number: fe-reflective-piping-silver20
|
|
 |
PRODUCT INFO
|
Type:
Piping
Style :
Reflective
Finish :
Reflective Beads
Color : Silver
Width : 1cm Wide
Weight : 1 oz per 5 yards
Stretch : None
Composition : 100% PET
PRODUCT INFO
New! Retroreflective High Visibility fabric is a high-tech fabric with a coating of tiny glass beads that reflect light back to its source. It is the same technology used in street signs and other safety clothing/equipment. Strips of this can be easily sewn on on any fabric for use at night, safety and sports. The reflective trimming can effectively improve safety and reliability while also allowing for unlimited coverage/possibilities.
SOLD BY
THE YARD
ALL Fabrics are sold in
continuous yard lengths. For Example: if you order 3 yards of a fabric that is
sold as: 'Sold By The Yard. One Yard = 53" wide, X 36" long' You Will
receive ONE piece of fabric, 53" wide by 108" long. NOT 3 pieces of fabric,
53" wide X 36" long. And so on. Price is by the running yard, so when
purchasing, please remember to type the number of yards you need into the
quantity box (on the top listing) and click Add to cart.
|
USES
This reflective fabric is perfect for making highly visible safety equipment. It can also be used for sporting goods; the reflective properties are great for jogging or biking at night and will ensure that one will be seen in headlights from a great distance.
|
CARE INSTRUCTIONS
Because of the way that this item is shipped, you may need to iron the fabric at a low temperature for about 10 minutes per yard to remove creases.
Do not presoak, Machine wash warm,40°C or 105°F
Tumble Dry low
Cool iron, Do not exceed 120°C or 248°F
Do not Bleach
Do not dry-clean
Some suggestions for extending the life reflective fabric:
1. When machine washing, you may use mild detergent, but not Bleach or Fabric Softener
2. Try to avoid washing the reflective products with your work jeans or any clothing with rough fabric or edges. The microscopic glass beads on the reflective fabric can be worn off by the rough texture.
3. Try to line dry your reflective products. If you chose to machine dry, try to remove the product immediately. The added Heat can damage the reflective fabric.
|
HANDLING PRECAUTIONS
1. Our reflective fabric is composed of aluminum coated micro-glass beads. The aluminum layer is easily damaged in acid, alkali or humid environment which on one hand will influence the retro reflective performance of our reflective fabric, and on the other hand wull cause possible color difference and expose the base fabric.
Do not drip or wipe the surface of reflective fabric with acid or alkali. Avoid soaking in acid or alkaline solutions for a long time.
2. Store in a cool, dry and ventilated place below 26.7°C or 80°F and lower than 70% relative humidity.
3. Try to avoid using water-cooled air conditioner in manufacturing process
4. We strongly recommend all workers wear gloves during garment manufacturing, to avoid possible blemishes caused by sweat. Meanwhile, try to avoid direct contact with machine oil or other corrosive liquids.
5. Iff possible, try to replace the metal machine presser with a plastic one to reduce the friction on the reflective surface during the sewing process.
6. Try to slow down when sewing on thicker parts to avoid possible abrasion on the surface of the reflective fabric.
7. The reflective fabric shall be handled with care during production and try to avoid abrasion with sharp objects.
8. Finished reflective products are recommended to be dried or dehumidified before packing.
9. Reflective fabric sewed on garments scuff or edges of sippers are susceptible to friction.
10. Before sewing, try to pinpoint the sewing line, and avoid sewing and removing repeatedly. Otherwise, the obvious pinhole might affect the garment appearance.
|
|
|
|

|
|